【精品专业论文】宪法的几个基本问题研究,宪法,法律,法学,法学理论,国家法,学位论..
扫扫二维码，随身浏览文档
手机或平板扫扫即可继续访问
宪法的几个基本问题研究
举报该文档为侵权文档。
举报该文档含有违规或不良信息。
反馈该文档无法正常浏览。
举报该文档为重复文档。
推荐理由：
将文档分享至：
分享完整地址
文档地址：
粘贴到BBS或博客
flash地址：
支持嵌入FLASH地址的网站使用
html代码：
&embed src='/DocinViewer-4.swf' width='100%' height='600' type=application/x-shockwave-flash ALLOWFULLSCREEN='true' ALLOWSCRIPTACCESS='always'&&/embed&
450px*300px480px*400px650px*490px
支持嵌入HTML代码的网站使用
您的内容已经提交成功
您所提交的内容需要审核后才能发布，请您等待！
3秒自动关闭窗口Service Unavailable
Service Unavailable
HTTP Error 503. The service is unavailable.Hindawi Publishing Corporation
International Journal of Antennas and Propagation
Impact Factor 0.827
Journal Menu
International Journal of Antennas and PropagationVolume ), Article ID
pagesApplication ArticleEvaluation of SAR Distribution in Six-Layer Human Head Model1 and 21Young Researchers Club, Bushehr Branch, Islamic Azad University, Bushehr,
Iran2Iran University of Science and Technology, Tehran,
IranReceived 4 May 2012; Revised 2 August 2012; Accepted 16 October 2012Academic Editor: Aurora And&#jar Copyright (C) 2013 Asma Lak and Homayoon Oraizi. This is an open access article distributed under the , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.The interaction between human head model and electromagnetic field sources is studied. The head models are composed of one and six layers. The six layers are skin, fat, bone, dura (the outer membrane of brain and spinal cord), CSF (colony stimulating factor), and brain. An antenna as a source of exposure is simulated too. The E-field strength distribution in both one- and six-layer human models is shown to estimate the intensity of E-field penetration in human head. Like standard models, the antenna is situated near the head model at a distance of 5 mm. The local and average SARs (specific absorption rates) are simulated at 900 MHz in both human head models. The results are then compared between the two models. The HFSS software is used for all the simulations. The paper wants to show that the initial model (one layer) is not a good model, because the real human head tissue is not equivalently modeled. It seems that the values of one-layer model are not reliable, so the paper considers the better and more similar human head model and compares these two models.1. Introduction It is well known that high frequency EM fields can damage human and other biological tissues by damaging molecular structure and rising of body temperature.The biological effects of radiofrequency fields and living systems can be evaluated at various levels including the molecular, subcellular, organ, or whole body environments. According to [, ], bioeffects from radiofrequency fields are classified into three categories: that is, high-level effects (thermal), intermediate-level effects (athermal), and low-level effects (nonthermal). Thermal effects are energy depositions higher than the natural human thermoregulatory capacity. The studies show some effects due to nonthermal and athermal sources such as: blood brain barrier, morphology, immune system, gene and chromosomal morphology, enzyme activity, and tumour promotion. More information can be seen in [–]. In this paper dosimetry and SAR are defined. So the human head model (one and six layers) and an antenna as an exposure source are simulated in HFSS software. For validation of results two antenna types are used, dipole and PIFA. The results for SAR and E-field strength for these two models are shown and compared. Because of some limitations the standard phantom models are made of one layer. For example, because of the gel or liquid materials, it is not easy to model all tissues. For example, the human head is a multilayer tissue, and its modelling is very hard. These phantoms are not good models for the human tissue, because the real properties of tissues are different from each other. Also, the human head does not have equivalent electrical properties. So the Six-layer phantom model is the better model of human head to simulate.2. Measurements of EM Field Absorption In this part the dosimetry is introduced. Some parameters have been used to measure EM fields. The SAR as a quantity for EM measurement at radiofrequency spectrum is defined and finally the electrical properties of tissues, that is, conductivity and permittivity, are described.2.1. Definition of Dosimetry According to [] the relationship between exposure levels and electromagnetic energy deposited in the body is called “electromagnetic dosimetry.” On the other hand, the electromagnetic dosimetry describes the relationship between the induced fields in biological bodies and distribution of an electromagnetic field in free space. Dosimetry information is very important to protect humans from probable electromagnetic field health hazards.2.2. Specific Absorption RateBy the widespread wireless device applications, such as mobile phones, the persons, and operators living and working in near electromagnetic sources, the biological effects of exposure to these electromagnetic fields are an important subject. The safety standards, such as the Federal Communication Commission (FCC), the International Commissions on Nonionizing Radiation Protection (ICNIRP), and National Radiological Protection Board (NRPB), are established for human protection and safety from electromagnetic fields. The specific absorption rate (SAR) is used to quantify the energy absorbed in tissues at radiofrequency spectrum, which is expressed in units of watts per kilogram. SAR is defined as the ratio of the absorbed power to the absorbing mass [, ]. The total power absorbed in the human body is
is the conductivity of tissue,
is the electric field intensity, and
is the volume of the biological tissue. SAR is defined as
is the conductivity of tissue,
is is the electric field intensity and
is the mass density of the tissue.2.3. Human Tissues
Human body tissues have different values of dielectric properties, that is, permittivity and conductivity []. These properties are functions of several variables, such as frequency, geometry and size of tissue, and water contents. For example, the dielectric constant of a high water content tissue is shown in Figure , as a function of frequency.Figure 1: Dielectric properties spectrum of a high water content tissue [].3. Simulations
Many researchers have simulated, measured, and evaluated the probable biological effects of EM fields on the human and other living systems. Several researchers have simulated the human body models, specially the human head and have evaluated the effective parameters on SAR [–].3.1. Phantoms
Measurements of SAR and EM fields in the human b consequently, the phantoms have been designed to model the human body at normal body temperatures. They have many shapes, such as spherical and human-like bodies. The liquids or gels as materials to tissues are placed in phantoms and exposure source is situated near them. One robot arm will then measure the E or H field by a probe placed at various locations near the model. A computer processor calculates the SAR. These measurement systems have several problems.3.2. Modelling by HFSS Software
Because of the available commercial systems, the common models for SAR measurements are a thin bowl (a 5 mm thickness shell with 4.6 relative permittivity) containing fully the head (brain) tissue equivalent materials. Figure
shows this commercial model. Figure 2: One-layer human head model defined in HFSS software.
Then a six-layer human head model has been tried instead of a one-layer common phantom model, because it models the real human head in a much better way as shown in Figure . This new model is composed of six spheres, similar to a six-layer model for the human head, that is, skin, fat, bone, dura, CSF, and brain as shown in Figure . Figure 3: Six-layer human head model defined in HFSS software.Figure 4: The perspective of Six-layer human head model [].Tables , , and
show the model properties and dimensions in HFSS simulations.Table 1: Specifications of one-layer head.Table 2: Other specifications of model.Table 3: Tissue properties and thickness of six-layer human head model [].3.3. Source Exposure
A dipole antenna has been used as the exposure source as shown in Figure . The antenna is situated at 5 mm distance from the head models in both one- and six- layer models. The simulations have been done at frequency 900 MHz. The length of antenna is 149 mm, its radius is 1.8 mm and the frequency of operation is 900 MHz.Figure 5: Dipole antenna.3.4. Characteristics of Models
All specifications of the one- and six-layer human head model and dipole antenna are shown in Tables
to .4. Results In this section the results of human head model in one and six layer and antenna model both dipole and PIFA are shown. Also the results for SAR and electric fields strength are compared.4.1.
“One-Layer” Human Head Model
with Dipole Antenna at 0.9 GHzThis model consists of a shell with 5 mm thickness and a sphere with 85 mm radius as the head equivalent materials. According to (), the SAR has a direct relationship to the E-field strength. Because of the importance of the electric field in SAR calculations, the E-field strength distribution in the one-layer head model is shown in Figure . The maximum value is at the nearest point to the source exposure (red colour). The local and average SAR as a function of the distance between the dipole and the head model is shown in Figure .Figure 6: E-field strength distribution in one-layer human head model at 900 MHz.Figure 7: Head model as a function of the distance between the dipole and the head model.4.2. “Six-Layer” Human Head Model with Dipole Antenna at 0.9 GH The E-field distribution in the six-layer model is simulated and shown in Figures , , , , , and . The E-field strength is simulated in all the six layers, by the aforementioned procedure.Figure 8: E-field strength in brain tissue at 900 MHz.Figure 9: E-field strength in CSF tissue at 900 MHz.Figure 10: E-field strength in Dura tissue at 900 MHz.Figure 11: E-field strength in bone tissue at 900 MHz.Figure 12: E-field strength in fat tissue at 900 MHz.Figure 13: E-field strength in skin tissue at 900 MHz.The result of simulations is shown in the Table . As shown the E-field strength is decreasing by the distance from the source, consequently the maximum value of E-field strength in the brain tissue as an internal layer is the lowest.Table 4: E-field strength in six-layer model, dipole antenna.The comparison of SAR between one- and six-layer head models are given in Table .Table 5: Compression between SAR in two models (one- and six-layer model by Dipole antenna).The values show that the maximum of SAR strength in the six layers is more than one layer. It says that the standard model (that is used in standard systems) may be not suitable and complete and does not show the accurate model of human tissues. 4.3. “Six-Layer” Human Head Model with PIFA Antenna at 0.9 GHzFor further consideration of the problem, simulation is repeated for head model, but with PIFA antenna at 900 MHz []. The geometry of antenna is shown in Figures , , and . The other specifications of the model are according to Table . The results for the E-field strength and SAR simulations are shown in Figures , , , , , and .Figure 14: The structure of PIFA antenna at 0.9 GHz []. *Height of the antenna patch from the ground plane is the 7.5 mm.Figure 15: PIFA antenna at 900 MHz.Figure 16: Six-layer human head model with PIFA antenna.Figure 17: E-field strength in brain tissue at 900 MHz.Figure 18: E-field strength in CSF tissue at 900 MHz.Figure 19: E-field strength in Dura tissue at 900 MHz.Figure 20: E-field strength in bone tissue at 900 MHz.Figure 21: E-field strength in fat tissue at 900 MHz.Figure 22: E-field strength in skin tissue at 900 MHz.The results show that the E-field strength is decreasing by increasing the distance from the source: consequently, the maximum value of E-field strength in the brain tissue at the internal layer is the lowest. The results for PIFA antenna are similar to those of dipole antenna, with regards to the decreasing values of SAR with increasing the distance between the source and head. Table
shows the results for PIFA antenna. Table 6: E-field strength in six layers (PIFA antenna).Table
shows the SAR maximum strength values in one- and six-layer model by PIFA antenna as a source exposure. According to these results it has been seen that the SAR values in these simulation depend on the distance from antenna and conductivity value of tissues. For example in one-layer model shell is the nearer layer to the exposure source, so although it has lower conductivity, the SAR is more than head equivalent material. Also in six-layer model the SAR is varied by conductivity and distance from the exposure source too. For example, dura and skin have same conductivity but the skin is the nearer layer to antenna, so it has more SAR.Table 7: Compression between SAR in two models (one- and six-layer model by PIFA antenna).The penetration of fields on human body, for example, human head, has been considered by many researchers. Some of these researches are in simulation by software and some of them are done by measurement systems (human phantom models). For more information the references [–] can be seen. So, at the same frequency of exposure source, the results may be different because of the difference in human body model. 5. Conclusions
The simulations are done at 900 MHz, because it is the standard for the mobile communication systems. The resulting data show that when the human body tissue especially the human head (because of placing the cell phone near the head) is exposed to EM the fields penetrate in all the human head tissues. The E-field strength penetration and SAR deposition depend on tissue material properties (conductivity, permittivity, and permeability). By increasing the conductivity, SAR increases too. In this paper two human head models have been used, one and six layer. The one-layer human head model is simple and easy to use for simulation and measurement system, because the human body equivalent materials are gel or liquid in commercial SAR measurement system. But it has no assurance and the measurements are not reliable, because it does not show a good and real model of human head.So Six-layer head model has been used. In Tables
and , the local and average SAR for one and six layer is shown. The compression of both local and average SAR in six-layer models is more than one layer. Furthermore, the commercial models (viz., one layer model) may not be good models for the human body, because the results show that the EM field penetration is higher in a six-layer model. So the design of a better model is unavoidable for the study of the exposure of human body to EM field sources. The result for another mobile antenna, that is, PIFA is repeated and showes similar results. Results show that by PIFA antenna the E-field strengths are very lower. According to () the SAR is lower too.References
M. H. Repacholi, “Low-level exposure to radiofrequency electromagnetic fields: health effects and research needs,” Bioelectromagnetics, vol. 19, no. 1, pp. 20–32, 1998. A. G. Pakhomov, Y. Akyel, O. N. Pakhomova, B. E. Stuck, and M. R. Murphy, “Current state and implications of research on biological effects of millimeter waves: a review of the literature,” Bioelectromagnetics, vol. 19, no. 7, pp. 393–413, 1998. F. S. Barnes and B. Greenebaumby, Bioengineering and Biophysical Aspects of Electromagnetic Fields, Handbook of Biological Effect of Electromagnetic Fields, Taylor & Francis Group, London, UK, 3rd edition, 2007. P. Vecchia, R. Matthes, G. Ziegelberger,
James Lin, and R. Saunders, Exposure To High Frequency Electromagnetic Fields, Biological Effects and Health Consequences (100 KHz&#x GHz), International Commission on Non-Ionizing Radiation Protection, Oberschleissheim, Germany, 2009. J. C. Lin, “Effects of microwave and mobile telephone exposure on memory process,” IEEE Antenna and Propagation Magazine, vol. 42, no. 3, pp. 118–120, 2000. H. Khodabakhshi and A. Cheldavi, “Irradiation of a six-layered spherical model of human head in the near field of a half-wave dipole antenna,” IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 3, pp. 680–690, 2010.
· D. A. Sánchez-Hernández, High Frequency Electromagnetic Dosimetry, 2009. J. C. Lin, Advances in Electromagnetic Fields in Living Systems, vol. 4, Springer, New York, NY, USA, 2005. C. Gabriel, “The dielectric properties of tissues,” in Radiofrequency Radiation Dosimetry and Its Relationship To the Biological Effects of Electromagnetic Fields, B. J. Klauengerg and D. Miklavic, Eds., vol. 82 of Nato Science Series, pp. 75–84, High Technology, London, UK, 2000. C. W. Khoo, Multi-band antenna for handheld transceivers [Ph.D. thesis], 2002. A. Lak, H. Oraizi, and F. Mohsenifard, “Risk from electromagnetic fields,” in Proceedings of the 3rd International Conference on Mechanical and Electrical Technology (ICMET '11), Dalian, China, August 2011. L. Asmae and O. Homayoon, “Simulation and evaluation of specific absorption rate in human body in high frequency electromagnetic fields,” in Advanced Materials Research, vol. 433&#x, pp. , Trans Tech Publications, Zurich, Switzerland, 2012. M. R. I. Faruque, M. T. Islam, and N. Misran, “Analysis of SAR levels in human head tissues for four types of antennas with portable telephones,” Australian Journal of Basic and Applied Sciences, vol. 5, no. 3, pp. 96–107, 2011. “International Standard IEC 62209-1, human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-human models, instrumentation, and procedures-Part 1: procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz),” IEC publication, 2005. A. And&#jar, J. Anguera, C. Picher, and C. Puente, “Human head interaction over ground plane booster antenna technology: functional and biological analysis,” Progress in Electromagnetics Research, vol. 41, pp. 153–185, 2012. A. Cabedo, J. Anguera, C. Picher, M. Ribó, and C. Puente, “Multiband handset antenna combining a PIFA, slots, and ground plane modes,” IEEE Transactions on Antennas and Propagation, vol. 57, no. 9, pp. , 2009.
· S. Risco, J. Anguera, A. And&#jar, C. Picher, and J. Pajares, “Comparison of a monopole and a PIFA handset antenna in the presence of the human head,” Microwave and Optical Technology Letters, vol. 54, no. 2, pp. 454–459, 2012.
· A. Lak and H. Oraizi, “The effect of distance of human head model from EM sources on SAR,” Journal of Basic and Applied Scientific Research, vol. 2, no. 9, pp. , 2012.}